Lenkräder für die PS4

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
Sind die Winkel/Verbindungselemente aus Metall?
ja sind sie! hatte überlegt "die guten" zu nehmen... die normalen sollten aber locker reichen. und am ende kommen eh kleine kappen oben drauf!

einmal das set in wertig: https://www.dold-mechatronik.de/Win...yp-Nut-8-mit-Befestigungssatz-und-Abdeckkappe
und einmal das, was ich wohl nehmen werde: https://www.dold-mechatronik.de/Winkel-40-I-Typ-Nut-8-inkl-Befestigungssatz-und-Abdeckkappe

habe ein wenig nach händlern geschaut und auch den örtlichen eisenhandel mit nem angebot beauftagt. 1700 euro wollen die für material und zuschnitt. motedis war auch ok, aber angebot und preis stimmen bei Dold einfach, imo!
 
PRO:

Da sich Derde das Omega GT Rig gekauft hatte, habe ich auch keine Bilder etc verlinkt. ;)
So sieht das exakt bei Ihm aus. Nur eben mit dem Porsche + Ferrari F1 Wheel von Fanatec.

mutti hat das in silber und hat einer seiner VW Golf GTI sitze dort drauf montiert... :)

btw wie kommst du auf den Mazda Sitz? Verm die Idee aus einer der Videos entnommen ?
 

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
PRO:

Da sich Derde das Omega GT Rig gekauft hatte, habe ich auch keine Bilder etc verlinkt. ;)
So sieht das exakt bei Ihm aus. Nur eben mit dem Porsche + Ferrari F1 Wheel von Fanatec.

mutti hat das in silber und hat einer seiner VW Golf GTI sitze dort drauf montiert... :)

btw wie kommst du auf den Mazda Sitz? Verm die Idee aus einer der Videos entnommen ?
ok, i gebe definitiv keine 650+ euro nur für das rig aus, wenn ichs für 350 fast exakt so nachbauen kann!! bleiben mir direkt 300 kracher mehr für ein wertigeres lenkrad (aka CSL ELite). :)
benötige vorerst nur das normale Elite wheel... aber das neue McLaren V2 für 200 euro habe ich ins auge gefasst.

der mazda sitz war halt gerade da. ab und zu verschrotten wir mal was... und dieser war übrig. ich halte aber weiter aussschau nach einem ordentlichen schalensitz ohne klimmbimm. aber warum sollte ich nun überhastet 150-200 in den sitz investieren wenn ja einer vorhanden ist!? ist definitv nicht meine wunschlösung aber passt erstmal.

edit: @DERDE: hat das GT Omega die base frame auch aus dem leichten alu oder wurde da die schwerere variante genommen?!

edit2: ach so, weiss jemand von euch wie ich an Dold Mechatronik coupons komme?! die haben in ihrem warenkorb eine coupon funktion, ich kann aber online nirgends infos zu deren coupons finden!
 
Zuletzt editiert:
Achso. Ja nee, alles gut. Hatte mich nur gewundert, was du mit einem Mazda-Sitz am Hut hast. :p
Hattest du nicht auch mal gemeint, dass Ihr ein Audi R8 Sitz rumfahren habt ? Ist vermutlich schon weg, nehm ich mal an...

Gut das mit der Base löst sich eigentlich von alleine, sobald man darauf platzt nimmt. ;) Somit brauchst du diese nicht stärker machen.
Rigidity ist ja sowieso durch die Konstruktion gegeben.

Glaube auch nicht, das er hier antworten wird aber ich kann gerne kommendes WE, wenn wir wieder heizen, mal für dich nachfragen.
Oder....du joinst einfach den Chat. (aber dank Sony ist das ja nun umständlicher)
 

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
Achso. Ja nee, alles gut. Hatte mich nur gewundert, was du mit einem Mazda-Sitz am Hut hast. :p
Hattest du nicht auch mal gemeint, dass Ihr ein Audi R8 Sitz rumfahren habt ? Ist vermutlich schon weg, nehm ich mal an...

Gut das mit der Base löst sich eigentlich von alleine, sobald man darauf platzt nimmt. ;) Somit brauchst du diese nicht stärker machen.
Rigidity ist ja sowieso durch die Konstruktion gegeben.

Glaube auch nicht, das er hier antworten wird aber ich kann gerne kommendes WE, wenn wir wieder heizen, mal für dich nachfragen.
Oder....du joinst einfach den Chat. (aber dank Sony ist das ja nun umständlicher)
ja bitte, frag da gerne mal nach! ich bekomme nur eurer konversation im Dirt chat mit! gerne komme ich mal in einen voice chat mit euch!

ja, der R8 wurde leider nicht verschrottet sondern noch verkauft (obwohl der echt übel aussah). 2 Recaros hat der kollege vor 3 wochen erst entsorgt! :panik: aber hier findet sich immer mal wieder was bei den Unfallern! ich habe ja nun erstmal einen sitz und warte da ganz entspannt wenn mal wieder was zum ausschlachten ansteht. dann wird der alte entsorgt und einfach ein neuer drauf gemacht.

danke für die rahmen info. denke ebfalls dass ich mit 120x40 in der leichten bauweise gut fahre.

ich bin nun so heiss aufs basteln... weil es ja quasi echt nur lego für erwachsene ist! freu freu freu...

jetzt muss nur noch das CSL Elite wieder verfügbar sein. finde es auch krass, dass die nur selber vertreiben. force2motion bietet auch noch fanatec zeugs an... aber selbst auf idealo und geizhals sind die nicht gelistet!

ach so... am ende kostet mich der ganze spass wohl um die 1000 euro. ich denke mir jedoch, der lockdown wird noch ein wenig andauern, ACC wird hoffentlich via patch noch auf stabile 60fps gebacht und irgendwas muss man ja fahren! ;) warum dann nicht mit qualität?! :D
 

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
Als nächstes brauchst du einen Spiele PC :D
:D du glaubst garnicht wie oft mir das thema durch den kopf geschwirrt ist... während der planung!
hätte derbe bock auf die modding möglichkeiten von AC! aber ACC sollte dann auch erstmal reichen... (obwohl mir hier ein wenig die strassenautos fehlen!!).

aber ne, das ist dann doch zu viel des guten. das wäre dann nochmal nen 1000er! ich warte mit meiner PS5 lieber auf PSVR2.0 und verzichte gerne auf triple screen und PC setup! das wird schon... 8)
 

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
Als nächstes brauchst du einen Spiele PC :D
Btw: Raceroom via steam läuft auf dem 2011 MacBook mit 45 fps!!

edit: mit bis zu 51 in 1440x900! :D ich will die settings nun noch ein wenig runter schrauben (track side details, schatten) um die 60 zu erreichen. das sollte dann reichen um das lenkrad unter windows mal einzurichten und testweise ne runde in RaceRoom zu drehen. ...auf nem 10 jahre alten Laptop! kannst du sagen was du willst... die alten MBP's sind schon ne feine sache!
 
Zuletzt editiert:

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
Ordentliche Grafikkarten sind momentan sowieso unbezahlbar.
Bleiben also nur alte Klassiker.
ja, das lohnt sich wirklich bei mir nicht! am ende wären es 2-3 titel die ich auf nem 1000+ euro rechner spielen würde.

ich warte nun entspannt auf GT7, AC2, ACC upgrade, PSVR2.0.... es wird so gut!! :D zumal ich auch dem triple screen nicht mehr nachheule... mit zukünftigem VR bin dann auch ich endlich zufrieden.
 

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
update 12.02.2021:

so, the 4th and final CAD drawing is done. i'm ready to order!






it became basically the old P1 cockpit.

i have my material list ready like this:

2x 120x40 1400mm base frame
2x 120x40 500mm base frame
2x 120x40 780mm wheel arms
2x 40x40 500mm seat holder
2x 40x40 580mm pedal tray (because the pedal bracket will be sitting outside of the frame and i need to consider the base frame)
1x 80x40 580mm pedal tray (because the pedal bracket will be sitting outside of the frame and i need to consider the base frame)

20x corner brackets including screws
18x caps to cover the ends
10x nuts for pedal tray
10x bolts for pedal tray

https://www.simxpro.shop/home/Fanatec-CSL-Front-mount-410-420-mm-p212746980
wheel mount (as linked above) i will order later or when a new Fanatec Wheel is announced (you know, the drilled holes for the buttons and such..)
pedal brackets (as linked above) i will try to buy from this guy on ebay

i will get some solid feet, like the simlab ones, later. will use some furniture pads for now so the rig isnt sitting directly on the wooden floor.

this looks so much cleaner, material list and construction wise! i hope i'm good now. anything i forgot!?

thank you so much @SGETI for helping me A LOT along the way!!!
 
Zuletzt editiert:

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
Update: February 14th 2021

Copied from GTplanet.com

Guys, I wanna take you on a ride, same ride I was in... the train of happiness/bliss! Because shared fun is double the fun, right!?

So today, a lovely cold and snowy (plus sunny) day in February, mid Germany, few cars on the road (like you can set it up in good racing sim software) I picked up the first piece of the puzzle. The pedal brackets! But not only that...

While I was planning my Rig the last couple of weeks, I was searching for accessories on eBay... on local eBay I found the P1 pedal brackets. I send a message to the seller, who turned out to be a sim racing nut, asking for the price of the brackets. A few messages later we had a deal plus an awesome conversation! It wasnt that typical eBay chatter, it felt like talking to a friend, ready to give me advice when needed!

saying he’d place the goods at some spot at his house so I could grab em, I drove like 30 min to arrive at his place today around 1pm. Being happy about our deal I had thoughts when I drove over there.
„It’s all good“, he said via email... „we sim racers have a codecs, we trust each other“.
I felt confident and when I arrived, walking up a snow covered lane, I picked up those braking pedal brackets and the profiles attached to them (wich all was presented in a nice way), got them off the ground and i fell in love! With the quality of the materials and the smoothness of that deal at the same time! Just awesome! Happy me!!





I left a bottle of Riesling whine I brought, send the 85 Euro via PayPal and a lovely message, before I left the area and drove home.

those brackets found a new home. Finally.


Nuts and bolts were included!



I’m very satisfied tonight with acquiring the first parts of what will be an awesome sim rig for me! That’s it for now, stay safe, stay healthy and have a good night!

Edit: just one small thing. I can’t stretch one topic to much but that kind of personal contact and interaction with “strangers” is what the world needs, imo! Maybe I’m making to much out of a simple selling situation but I feel good! Sooo good!
I’ll stay in contact with the buyer for sure.

We are one community! Peace. ✌️
 
Zuletzt editiert:

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
quick update, Feb. 22nd, 2021:
so while the wheel deck (edit: click here for a picture!) is already on its way from SimLabs storage to mid germany, i ordered the rest of all necessary parts this morning
(from 2 different sources).
i finally found some cheap feet (click here) to get some more height for my rig (as mentioned before). the feet set even features those 10mm plates... lets see.
even when i had a look at my material list multiple times... i'm pretty sure, i fogot something!
its always like that!

this week, i will collect all the tools needed to assemble the whole thing. i will prepare the working environment like making space and laying out protection for the wooden floor.

what else is there to say?! well, i'm planning on documenting the whole building process and putting a video on youtube. i was thinking of taking pictures only but a video might be better, more detailed. not sure yet how i will do this and what kind of video i will create, but i want to share somehow! maybe some other people will notice and start creating their own project...

i'll be back as soon as all the parts are delivered and the building process is about to start!
stay safe!
 
Zuletzt editiert:

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
quick update, Feb. 24th, 2021:

so today, 2 packages got delivered! one from Motedis with some metal plates for the feet and wheel arms (plus some minor stuff like caps) and one from SimLabs!

and oh boy... that wheel deck is one solid piece of hardware!
you can feel the quality when you have it in hands!
i'm so glad i was listening to the advices here!!
i thought the wheel deck would be greyish (from the pics in the SimLab shop) but its an all black finish and screws plus nuts were included!

so there is one final delivery coming next week... and then its Bob the builder time!
 

PRO_TOO

avg. parcel delivery man
systems, systems, systems, systems
PSN-Name: PRO_TOO
Spielt gerade: ACC, AMS2, AC, RRE
mini update: mein rig ist zu 37% fertig gestellt. Dieses WE soll es dann finalisiert werden, Eindrücke folgen! Soeben habe ich dann mein wheel plus pedale bestellt! Auch hier werde ich Euch meine Eindrücke berichten.... gosh bin ich aufgeregt! :D
mehr gibts vorerst nicht zu sagen (obwohl ich wollte)! :rofl:

:love: ich fühle mich wie ein 6jähriger an Nikolaus... und bald ist Weihnachten! :love:
 
Top